Daniel Defense Pistol Grip Black With Trigger Guard
Daniel Defense Pistol Grip Black With Trigger Guard
$36.00
34 in stock
Disclaimer: It is the customer’s responsibility to ensure that all orders comply with applicable local and federal regulations. Non-compliant orders are subject to a 30% restocking fee. We reserve the right to dispute any chargebacks related to such orders.
The Daniel Defense pistol grip is an improvement to the old standby A2. Daniel Defense designed their grip with ergonomics and controllability in mind. This grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip wet or dry.
- 4.25 Inches Tall
- 2 Inches Wide
- 1.38 Inches Thick
- Weight: 0.20 lb
*Screw and Washer included with package.
Your Trusted Online Firearms Store – Shop with Confidence!
Looking for the best prices on Daniel Defense Pistol Grip Black With Trigger Guard by Daniel Defense? Tungsten Creek Tactical proudly serves Lakeland with unbeatable pricing, expert service, and exclusive rewards.
Best Prices in Lakeland
Earn Rewards on Every Purchase.
Special Bundles & Firearm Packages Available.
Safe & Secure Checkout – Shop with confidence using trusted payment options.
Compliance-Ready – All sales follow federal, state, and local firearm laws.
Limited Stock – Visit Us Today or Shop Online Before They’re Gone!
| UPC | 815604016063 |
|---|---|
| Manufacturer | Daniel Defense |
| Manufacturer Part Number | 21-071-05177-006 |
| Length | 5 |
| Model | Trigger Guard |
| Package Height | 4.0 |
| Package Width | 6.0 |
| Product Type | Accessory-Grips |
| Shipping Weight | 0.345 |
The Daniel Defense pistol grip is an improvement to the old standby A2. Daniel Defense designed their grip with ergonomics and controllability in mind. This grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip wet or dry.
- 4.25 Inches Tall
- 2 Inches Wide
- 1.38 Inches Thick
- Weight: 0.20 lb
*Screw and Washer included with package.
Your Trusted Online Firearms Store – Shop with Confidence!
Looking for the best prices on Daniel Defense Pistol Grip Black With Trigger Guard by Daniel Defense? Tungsten Creek Tactical proudly serves Lakeland with unbeatable pricing, expert service, and exclusive rewards.
Best Prices in Lakeland
Earn Rewards on Every Purchase.
Special Bundles & Firearm Packages Available.
Safe & Secure Checkout – Shop with confidence using trusted payment options.
Compliance-Ready – All sales follow federal, state, and local firearm laws.
Limited Stock – Visit Us Today or Shop Online Before They’re Gone!
| UPC | 815604016063 |
|---|---|
| Manufacturer | Daniel Defense |
| Manufacturer Part Number | 21-071-05177-006 |
| Length | 5 |
| Model | Trigger Guard |
| Package Height | 4.0 |
| Package Width | 6.0 |
| Product Type | Accessory-Grips |
| Shipping Weight | 0.345 |
Reviews
There are no reviews yet.








Reviews
There are no reviews yet.